Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Document templates
Submit manuscript

Section's articles " Sekciya 9. Biomedicinskaya elektronika "

Selective staining and analysis of micro and nanoplastics in water using Cy3 and Cy5 dyes
Cardiovascular diseases: classification of pathologies by pseudophase portrait and vectorcardiogram
Determination of superparamagnetic particles with minimal time to hyperthermia
Estimation of the magnitude of the magnetic field for drug delivery to the knee joint by magnetite nanoparticles
Taking into account parasitic effects in the design of inductance coils for wireless power supply systems for implants
Development and modification of algorithms for a flow counter-analyzer of submicron particles
Electrooxidation of urea on porous silicon electrode samples with different modifications
Design of inductance coils for wireless power supply systems for electrical equipment in the operating room
Application of cluster analysis and oscillation viscometer for early express diagnostics of thromboembolism
A mathematical model for estimating the service life of neurostimulators with non-rechargeable batteries with current stimulation
Photoplethysmographic sensor for recording blood flow parameters
Development of a method for increasing strain sensitivity and linearity of flexible sensors based on carbon nanostructures
Comparison of the results of measuring the temperature of the thermophysical equivalent of donor plasma under conditions of its heating before transfusion with the results of numerical modeling
Development and testing of a non-invasive blood glucose meter prototype based on the impedance spectroscopy technique
Development of a graph probabilistic model for calculating the reliability of the power supply system of an implantable neurostimulator
Development of software for modeling and evaluation of automated insulin therapy systems in silico
Analysis of the influence of external and internal disturbances on the dynamics of blood glucose in patients with type 1 diabetes mellitus
Analysis of electrical impulse propagation during epidural spinal cord stimulation.
The using of an artificial patient to research the sensitivity parameter of pacemakers
Optimization of Implantable Capacitive Blood Pressure Sensor Parameters Based on Numerical Modeling
Optimization of Electrode System Parameters Based on an Integral Selectivity Criterion for Enhancing the Efficiency of Neurointerfaces
Pain detection from EEG signals using machine learning
Development of criteria for evaluating the effectiveness of blood glucose concentration control in patients with type 1 diabetes mellitus
Changes in the activity and transmittance of a SERS-active nanopipette depending on storage time and conditions
Modeling of the gain coefficient of the SERS-active layer from a thin film of the Mo-Ag system by the method of ion-plasma deposition on the surface of the SIPM-capillary
Acoustofluidic device for separation of particles and cells
Development of a precision temperature measurement module for biomedical sensor systems
Application of a Butterworth filter for processing an electromyographic signal recorded using dry carbon electrodes
Surface modification of a metal stimulating electrode using nanosecond laser radiation of different power
Effect of dispersion parameters of carbon nanotubes on the properties of coatings
Selective staining and analysis of micro and nanoplastics in water using Cy3 and Cy5 dyes
Selective staining and analysis of micro and nanoplastics in water using Cy3 and Cy5 dyes
Authors
Polina Monahova
Status
In work
Cardiovascular diseases: classification of pathologies by pseudophase portrait and vectorcardiogram
Cardiovascular diseases: classification of pathologies by pseudophase portrait and vectorcardiogram
Authors
Anastasiya Strigina, Aleksandra Goncharova
Status
In work
Determination of superparamagnetic particles with minimal time to hyperthermia
Determination of superparamagnetic particles with minimal time to hyperthermia
Authors
Ivan Buzko
Status
In work
Estimation of the magnitude of the magnetic field for drug delivery to the knee joint by magnetite nanoparticles
Estimation of the magnitude of the magnetic field for drug delivery to the knee joint by magnetite nanoparticles
Authors
Maksim A. Shimanskiy
Status
In work
Taking into account parasitic effects in the design of inductance coils for wireless power supply systems for implants
Taking into account parasitic effects in the design of inductance coils for wireless power supply systems for implants
Authors
Ivan Mihaylov
Status
In work
Development and modification of algorithms for a flow counter-analyzer of submicron particles
Development and modification of algorithms for a flow counter-analyzer of submicron particles
Authors
Aleksandr Gerasimenko, Svyatoslav Paskalov
Status
In work
Electrooxidation of urea on porous silicon electrode samples with different modifications
Electrooxidation of urea on porous silicon electrode samples with different modifications
Authors
Eugenia Klyazheva, Elena Lazorkina
Status
In work
Design of inductance coils for wireless power supply systems for electrical equipment in the operating room
Design of inductance coils for wireless power supply systems for electrical equipment in the operating room
Authors
Yaroslav Chumakov
Status
In work
Application of cluster analysis and oscillation viscometer for early express diagnostics of thromboembolism
Application of cluster analysis and oscillation viscometer for early express diagnostics of thromboembolism
Authors
Dmitriy Y. Manilov, Aleksandr I. Kanevskiy
Status
In work
A mathematical model for estimating the service life of neurostimulators with non-rechargeable batteries with current stimulation
A mathematical model for estimating the service life of neurostimulators with non-rechargeable batteries with current stimulation
Authors
Valentina Maslova
Status
In work
Photoplethysmographic sensor for recording blood flow parameters
Photoplethysmographic sensor for recording blood flow parameters
Authors
Dar'ya Rodionova
Status
In work
Development of a method for increasing strain sensitivity and linearity of flexible sensors based on carbon nanostructures
Development of a method for increasing strain sensitivity and linearity of flexible sensors based on carbon nanostructures
Authors
Anastasiya Morozova
Status
In work
Comparison of the results of measuring the temperature of the thermophysical equivalent of donor plasma under conditions of its heating before transfusion with the results of numerical modeling
Comparison of the results of measuring the temperature of the thermophysical equivalent of donor plasma under conditions of its heating before transfusion with the results of numerical modeling
Authors
Vahtang Lemondzhava
Status
In work
Development and testing of a non-invasive blood glucose meter prototype based on the impedance spectroscopy technique
Development and testing of a non-invasive blood glucose meter prototype based on the impedance spectroscopy technique
Authors
Nikita Kiryutochkin
Status
In work
Development of a graph probabilistic model for calculating the reliability of the power supply system of an implantable neurostimulator
Development of a graph probabilistic model for calculating the reliability of the power supply system of an implantable neurostimulator
Authors
Andrey Morozov
Status
In work
Development of software for modeling and evaluation of automated insulin therapy systems in silico
Development of software for modeling and evaluation of automated insulin therapy systems in silico
Authors
Dmitriy Chuprakov
Status
In work
Analysis of the influence of external and internal disturbances on the dynamics of blood glucose in patients with type 1 diabetes mellitus
Analysis of the influence of external and internal disturbances on the dynamics of blood glucose in patients with type 1 diabetes mellitus
Authors
Anastasia Koniaeva
Status
In work
Analysis of electrical impulse propagation during epidural spinal cord stimulation.
Analysis of electrical impulse propagation during epidural spinal cord stimulation.
Authors
Natal'ya Karpova
Status
In work
The using of an artificial patient to research the sensitivity parameter of pacemakers
The using of an artificial patient to research the sensitivity parameter of pacemakers
Authors
Ivan P'yanov, Maksim Kornilov, Maksim Zaychenko
Status
In work
Optimization of Implantable Capacitive Blood Pressure Sensor Parameters Based on Numerical Modeling
Optimization of Implantable Capacitive Blood Pressure Sensor Parameters Based on Numerical Modeling
Authors
Denis Balahonov
Status
In work
Optimization of Electrode System Parameters Based on an Integral Selectivity Criterion for Enhancing the Efficiency of Neurointerfaces
Optimization of Electrode System Parameters Based on an Integral Selectivity Criterion for Enhancing the Efficiency of Neurointerfaces
Authors
Andrey Blaznin
Status
In work
Pain detection from EEG signals using machine learning
Pain detection from EEG signals using machine learning
Authors
Georgiy M. Pustovit
Status
In work
Development of criteria for evaluating the effectiveness of blood glucose concentration control in patients with type 1 diabetes mellitus
Development of criteria for evaluating the effectiveness of blood glucose concentration control in patients with type 1 diabetes mellitus
Authors
Elina Strukova
Status
In work
Changes in the activity and transmittance of a SERS-active nanopipette depending on storage time and conditions
Changes in the activity and transmittance of a SERS-active nanopipette depending on storage time and conditions
Authors
Denis V. Novikov, Vasiliy S. Kolmogorov
Status
In work
Modeling of the gain coefficient of the SERS-active layer from a thin film of the Mo-Ag system by the method of ion-plasma deposition on the surface of the SIPM-capillary
Modeling of the gain coefficient of the SERS-active layer from a thin film of the Mo-Ag system by the method of ion-plasma deposition on the surface of the SIPM-capillary
Authors
Sof'ya Kondrat'eva
Status
In work
Acoustofluidic device for separation of particles and cells
Acoustofluidic device for separation of particles and cells
Authors
Danil Krasnokutskiy, Stanislav Doroshenko
Status
In work
Development of a precision temperature measurement module for biomedical sensor systems
Development of a precision temperature measurement module for biomedical sensor systems
Authors
Anton Zotin
Status
In work
Application of a Butterworth filter for processing an electromyographic signal recorded using dry carbon electrodes
Application of a Butterworth filter for processing an electromyographic signal recorded using dry carbon electrodes
Authors
Elena S. Sosina
Status
In work
Surface modification of a metal stimulating electrode using nanosecond laser radiation of different power
Surface modification of a metal stimulating electrode using nanosecond laser radiation of different power
Authors
Nikita S. Krukovskiy
Status
In work
Effect of dispersion parameters of carbon nanotubes on the properties of coatings
Effect of dispersion parameters of carbon nanotubes on the properties of coatings
Authors
Evgeniya Kuznecova
Status
In work
© esgi.editorum.ru
Agreement Personal data protection and processing policy Support Powered by Editorum, 2026 Instructions
Login or Create
* Forgot your password?